Can I change keypad numbers?

ReplyWorldwide Model CRS5200 keypads have a mode that allows the user to change or recall the current keypad address. There are two methods for accessing this mode: 1) Hold down the Clr key while press 9,5,1. Then release the Clr key and press * key LED display 3 digits as the keypad address. 2) Press and hold “Clr” and press “1”. Then release both keys. This feature may be disabled from a previous base command. If it is disabled, use the 951 code listed above. Once one of the above actions has been performed, the two lower horizontal segments will light on the keypad. At this point, you have 5 seconds to do one of the following actions: 1) To recall the current address, press the “*” key. The address will blink out on the display (001 – 250). 2) To set a new address, simply type in the new 3-digit address (i.e. “0”-”0"-”1" = address 1, and “2”-”5"-”0" = address 250). If the address was changed, the keypad will use this new address on the next key press.