 |
Technical Specifications
Enclosure
- Lightweight, compact, gray A.B.S. plastic molded enclosure.
- Dimensions: 6.7" L x 3.1" W x 1.5" H.
- Weight: 6.5 ounces.
|
| |
User Input
- Soft-touch sealed membrane switch panel with 12 tactile keys.
- Seven are lettered a g.
- Three are marked Y(es)/+, A(bstain)/? and N(o)/-.
- The ! (Alert/raised hand) and (reset) keys provide additional functions.
|
 |
Display
- Seven-segment LED provides response entry confirmation and is visible in reduced lighting conditions.
|
| |
Power and Power Management
- Powered by a commonly available 9-volt alkaline battery and internally regulated to 5 volts for consistent performance throughout the life of the battery.
- Keypad is using power only when transmitting an entered response.
- st1:place>Battery provides sufficient power for 10,000+ responses before requiring replacement.
|
| |
User Identification
- Each keypad has a unique address between 1 and 50 and a radio frequency (RF) channel number. Combining this “address“ feature with a special response verification routine provides additional security.
- Keypads operate independently of each other, and keypad addresses are programmable.
- Individual pads can be password protected to preserve configurations.
|
| |
RF Technology
- Proprietary radio communication system provides reliable, barrier-free operation between keypads and their associated Base Station.
- Integrated error checking ensures accurate communication of responses.
- The Fleetwood Reply wireless keypad design uses license-free frequencies for communicating key presses to the Base Station.
- A 345 MHz RF keypad transmitter sends keypress information to the Base Station’s receiver.
- This transmitter is frequency synthesized and frequency modulated.
- Multiple channels provide installation flexibility.
- Internal antenna is enclosed and protected by the keypad housing.
|
| |
Range
- The system is designed to provide reliable operation in an area 100 feet by 100 feet using the Base Station's internal antenna.
- Greater range may be achieved by elevating the base station to reduce barriers to transmission.
|
| |
Control
Utilizes a high performance microprocessor with memory for storage of setup parameters and keypad addresses.
|
| |
Scalability
- Firmware is resident in the microprocessor chip, which can be replaced to facilitate easy upgrade during the life of the product.
- Adding keypads to an existing Base Station requires them to be set to new, unused addresses. No change is required on the Base Station when keypads of the same radio channel are added.
|
| |
Compliance
- FCC Rules and Regulations Part 15 certified.
- IC RSS121 certified.
- U.S. patent pending.
|
| |
System Configuration
A basic Reply EZ system consists of...
- one CRS1200-EZ Wireless Keypad per participant
- one CRS930-EZ Base Station for every 50 keypads of the same radio channel in a room, and
- one copy of application software. Optional accessories (purchased separately) include base station carrycases and keypad carrycases. Training, on-site technical support, and similar fee-based services are additional. Reply EZ resellers tailor these items according to customer need, and most offer a “package price that includes a system with value-added software and services.
|
| |
Base Station Model CRS930-EZ
- Dimensions: 7.75 W x 6.375 D x 3.375 H.
- Unit Weight: 2 pounds (3.5 pounds with cable and power supply).
- Speed: Within 0.5 to 1 second, a synthesized receiver processes responses from up to 50 keypads transmitting simultaneously on a single radio channel.
- Includes:
- Internal antenna.
- 2 user-selectable channels. (Note: Additional channels are available at a premium for special installations.)
- 35 foot long serial cable. Base Station connection: RJ45. PC connection: DB9.
- UL/CSA rated low voltage power supply. Input: 110-220 VAC. Output: 12 VDC. Current draw: less than 0.5 A.
- Introductory interactive audience polling/diagnostic software.*
- Does not include accessories such as carrycases. These additional items are priced separately.
|
| |
Base Station Carrycase Model CRS899B
- Styled as a checked luggage piece. Perimeter clasps. Lockable. Weight (case and foam only): 13 pounds. Dimensions: 24.25”D x 8.75”H.
- Stores Base Station, up to 32 keypads, serial cable, and power supply. (Purchased separately.)
|
| |
Keypad Carrycase Model CRS899K
- Styled as a checked luggage piece. Perimeter clasps. Lockable. Weight (case and foam only): 13 pounds. Dimensions: 24.25”W x 19.5”D x 8.75”H.
- Stores 50 keypads in a cut foam insert for security and shock protection. (Purchased separately.)
- NOTE: Designed to hold keypads only.
|
| |
Additional System Components & Accessories
Application Software
- Base Station ships with basic software for simplified polling and system diagnostics.
- Additional software is available, and its purchase is recommended to expand the use of the system from basic electronic polling to delegate voting, group decision making, market research, classroom learning, game shows, and other advanced applications.
|
| |
Pricing
Fleetwood sells its Reply family of products through authorized resellers. We invite you to contact us for further information or a reseller referral.
|
 |
Downloads
Technical specifications and pricing are available for download in PDF format.
Notice: By downloading from this location, user acknowledges and accepts all risks accompanying electronic file transfer.
|
| |
|