The serial number given to you by PowerCom can only be used on one computer. Activating PowerCom by using the same serial number on different computers is a violation of the PowerCom license agreement. Each serial number is associated with a maximum-keypad-allowed number that allows only a certain number of keypads to vote during the slide show.
Your computer must be connected to the internet to activate PowerCom.
Open PowerPoint after installing PowerCom. Go to the PowerCom Ribbon. Under the “Configuration” group click on System > Activate.
Enter the PowerCom Serial number and your email address and click the Activate button. PowerCom will connect to PowerCom registration servers and activate PowerCom. You are now registered.
When the activation is finished, the system will remind you "PowerCom was activated successfully" shown as followed.
It shows you have already activated PowerCom successfully, Click PowerCom menu -> Help -> About PowerCom view PowerCom license number.
If you have difficulty activating PowerCom, contact your PowerCom dealer for assistance.
You can
· Email us at PowerCom@dsii.net with a screen print or error message.
· Call us at 212-997-2000, Monday thru Friday 9 to 5 EST time zone for assistance.
· Visit www.PowerComARS.com and chat with our customer service representative for technical assistant.
Notes:
1. The PowerCom license allows a licensee to use one ARS meeting at a given time and we allow the licensee to install PowerCom on one computer as primary and on another one as back up. It is recommended that licensee save the 3rd activation count as an emergency spare license.
2. If you can not activate PowerCom license but you are connected to the internet. Please open a Windows Dos prompt (Start, Run) then try to PING PowerCom web site PING www.PowerComARS.com to ensure you can access the PowerCom license server.
Tip: Activate your license carefully. We allow three activations for each license, however only one ARS meeting at a given time can use PowerCom.