Technical Specifications for Wireless Keypad Model CRS1200-EZ:
Note: Reply EZ is a discontinued model
Enclosure
• Lightweight, compact, gray A.B.S. plastic molded enclosure.
• Dimensions: 6.7" L x 3.1" W x 1.5" H.
• Weight: 6.5 ounces.
User Input
• Soft-touch sealed membrane switch panel with 12 tactile keys.
Seven keys are lettered a – g.
Three are marked Y(es)/+, A(bstain)/., and N(o)/-.
The ! (Alert/raised hand) and (reset) keys provide additional functions.
Display
• Seven-segment LED provides response entry confirmation and is visible in reduced lighting conditions.
Power and Power Management
• Powered by a commonly available 9-volt alkaline battery and internally regulated to 5 volts for consistent performance throughout the life of the battery.
• Keypad is using power only when transmitting an entered response.
• Battery provides sufficient power for 10,000+ responses before requiring replacement.
User Identification
• Each keypad has a unique address between 1 and 50 and a radio frequency (RF) channel number. Combining this "address" feature with a special response verification routine provides additional security.
• Keypads operate independently of each other, and keypad addresses are programmable.
• Individual pads can be password protected to preserve configurations.
RF Technology
• Proprietary radio communication system provides reliable, barrier-free operation between keypads and their associated base station.
• Integrated error checking ensures accurate communication of responses.
• The keypad design uses license-free frequencies for communicating key presses to the base station.
A 345 MHz RF keypad transmitter sends key press information to the base station’s receiver.
This transmitter is frequency synthesized and frequency modulated.
Multiple channels provide installation flexibility.
• Internal antenna is enclosed and protected by the keypad housing.
Extract from Reply manuals
Reply® is a registered trademark of Fleetwood Group, Inc.
©Copyright 2005 Fleetwood Group, Inc.,